O. Platinum MaxExpert FR 0W-30 1L @ AS Rivor

O. Platinum MaxExpert FR 0W-30 1L

11,82 €

Standardid, kinnitused, spetsifikatsioonid
Heakskiit:
PSA PEUGEOT CITROËN B71 2312.
Orlen Oil soovitab:
Fiat 9.55535-DS1 Fiat 9.55535-GS1

SKU: QFS845B10
Brand: ORLEN
Unit: tk
Qty: Out of Stock

Add to inquiry

Description

Specification

General features

The new generation synthetic, multi-seasonal, mid-SAPS engine oil guarantees lower fuel consumption while maintaining adequate protection of all engine components. Owing to a unique technology, the oil provides exceptional level of protection at cold start, both in Diesel and petrol engines. It is ideal for city traffic and on highways.

Benefits:

reduction of engine operation costs through fuel economy,
quick start and adequate lubrication in low temperature,
exceptional protection of engine components when using Stop-Start systems,
long engine and filter lifetime,
ideal temperature and oxidation stability,
engine cleanness due to retention of soot in suspended state,
maintaining its properties between oil change intervals,
reduced emissions of compounds harmful to the natural environment.

Application

PLATINUM MAXEXPERT FR 0W-30 is intended for year-round use primarily in engines of passenger cars and light commercial vehicles, in BlueHDi Diesel engines with complex exhaust gas treatment systems equipped with SCR as well as modern petrol engines equipped with catalytic converters. The oil with such features is very often recommended for vehicles with Diesel Particulate Filter to guarantee maximum filter durability. It has been officially approved for the PSA Group vehicles (Peugeot, Citroën, DS, Opel) covered by the PSA B71 2312 specification and meeting Euro 6 emission standards. Simultaneously, it can be used in the latest Fiat engines.

Standards, approvals, specifications

Approval:
PSA PEUGEOT CITROËN B71 2312.
Orlen Oil recommends:
Fiat 9.55535-DS1 Fiat 9.55535-GS1

Physical and chemical properties

Parameter	Unit of measure	Typical values
SAE viscosity class	-	0W-30
Kinematic viscosity at 100°C	mm²/s	9,6
Structural viscosity CCS at -35°C	mPa*s	5650
Viscosity index	-	166
Flash point	⁰C	229
Pour point	⁰C	-48
Base number TBN	Mg KOH/g	5,2
Note: The above values of physical and chemical parameters are the typical ones. The actual values are specified in quality certificates attached to each product lot